Winter Sale!! Flat 10% Off on Prepaid Orders, Apply Coupon  WINTER10  in your Cart to get Instant 10% Discount. Last Few Hours!

LoRa Shield is a long-range transceiver on an Arduino shield form factor and based on Open source library. The Shield allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

LoRa Shield is based on Semtech SX1276/SX1278 chip, it targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

Using Hope RFs patented LoRaTM modulation technique the Dragino Shield featuring LoRa technology can achieve a sensitivity of over -148dBm using a low-cost crystal and bill of materials. The high sensitivity combined with the integrated +20 dBm power amplifier yields industry leading link budget making it optimal for any application requiring range or robustness.

LoRaTM also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity, and energy consumption.

These devices also support high performance (G)FSK modes for systems including WMBus, IEEE802.15.4g. The Dragino Shield featuring LoRa technology delivers exceptional phase noise, selectivity, receiver linearity and IIP3 for significantly lower current consumption than competing devices.


Features :

  1. Compatible with 3.3v or 5v I/O Arduino Board.
  2. Frequency Band: 915MHz/868 MHZ/433 MHZ (Pre-configure in a factory)
  3. Low power consumption
  4. Compatible withArduino Leonardo, Uno, Mega, DUE
  5. External Antenna via I-Pex connector
  6. Excellent blocking immunity.
  7. Built-in bit synchronizer for clock recovery.
  8. Preamble detection.
  9. 127 dB Dynamic Range RSSI.
  10. Automatic RF Sense and CAD with ultra-fast AFC.
  11. Packet engine up to 256 bytes with CRC.
  12. Built-in temperature sensor and low battery indicator.


Package Includes :

1 x LoRa Shield for Arduino

1 x SMA- Antenna


Specifications :-

Link Budget.

168 dB maximum

Constant RF output

+20 dBm 100 mW

Efficiency PA

+14 dBm

Programmable bit rate

up to 300 kbps.

High sensitivity

Down to -148 dBm.

Bullet-proof front end

IIP3 = -12.5 dBm.

Modulation.

FSK, GFSK, MSK, GMSK, LoRaTM and OOK

Antenna Length (mm)

78

Dimensions in mm (LxWxH)

52 x 53 x 24

Weight (gm)

22


Brand/Manufacturer Generic
Country Of Origin China
Packer / Importer Address Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka - 560027 India.
MRP Rs. 3392.5 (Inclusive of all Taxes)
Write a review
Please login or register to review

* Product Images are shown for illustrative purposes only and may differ from actual product.

LoRa Shield for Arduino V95

  • Product Code: EC-5270
  • Availability: Out Of Stock
  • Rs.3527.00
  • (Excluding 18% GST)

OR

For all Bulk & B2B Product Enquiries Kindly share your requirement at care@electronicscomp.com