The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the MKR WiFi 1010 is your one-stop-solution for many of the basic IoT application scenarios.
The MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. Its equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi-based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption.
Pinout diagram:
This thin board has been designed to offer a practical and cost-effective solution for makers to design IoT projects with minimal previous experience in networking. It is based on the low power Arm Cortex-M0 32-bit SAMD21, which is part of the Arduino MKR family. Wireless devices specifically designed for the Internet of Things (IoT).
Features:
- Digital I/O Pins: 8
- PWM Pins: 12
- Flash Memory: 256 KB
- SRAM: 32 KB
- Microcontroller: SAMD21 Cortex-M0+ 32-bit low-power ARM MCU
- Board Power Supply (USB/VIN): 5V
- Full-speed USB device and embedded host
- Pre-mounted headers with pin-out
Package Includes:
1 x Original Arduino MKR Wifi 1010 Board
Additional information
| Microcontroller | SAMD21 Cortex-M0+ 32bit low power ARM MCU (datasheet) |
| Radio module | u-blox NINA-W102 (datasheet) |
| Board Power Supply | 5V (USB/VIN) |
| Secure Element | ATECC508 (datasheet) |
| Supported Battery | Li-Po Single Cell, 3.7V, 1024mAh Minimum |
| Circuit Operating Voltage | 3.3V |
| Digital I/O Pins | 8 |
| PWM Pins | 13 (0 .. 8, 10, 12, 18 / A3, 19 / A4) |
| Interface | 1 x UART |
| Analog Input Pins | 7 (ADC 8/10/12 bit) |
| Analog Output Pins | 1 (DAC 10 bit) |
| External Interrupts | 8 (0, 1, 4, 5, 6, 7, 8, 16 / A1, 17 / A2) |
| DC Current per I/O Pin | 7 mA |
| Memory | CPU Flash Memory 256 KB (internal) |
| Clock Speed | 32.768 kHz (RTC), 48 MHz |
| LED_BUILTIN | 6 |
| Length (mm) | 61.5 mm |
| Width (mm) | 25 mm |
| Weight (gm) | 32 |
| Brand/Manufacturer | Arduino |
| Country Of Origin | Italy |
| Packer / Importer Address | Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka - 560027 India. |
| MRP | Rs. 4199.62 (Inclusive of all Taxes) |
* Product Images are shown for illustrative purposes only and may differ from actual product.
Original Arduino MKR Wifi 1010 Board
- Product Code: EC-5014
- Availability: 13
-
Rs.3559.00
- (Excluding 18% GST)