This module consists of a 5mm RGB LED and three150 limiting resistorsto prevent burnout. Adjusting the PWM signal on each colour pin will result in different colours.
This isa DIP 3 Color LED Module.Through the PWM adjusting, three primary colours can be mixed to obtain different colours.
Connect the red pin (R) on the KY-016 to pin 11 on the Arduino. Blue (B) to pin 10, green (G) to pin 9 and ground (-) to GND. Notice that you do not need to use limiting resistors since they are already included on the board.
Pin Connection with Arduino:
| LED module | Arduino |
| R | Pin11 |
| B | Pin 10 |
| G | Pin 9 |
| - | GND |
Features :
- The use of plug-in full-colour LED.
- RGB trichromatic limiting resistor to prevent burnout.
- With a variety of single-chip interface.
- Through the PWM adjusting, three primary colours can be mixed to obtain different colours
- The working voltage: 5V
Package Includes :
1 x DIP 3 Color LED Module.
Specifications :-
| Operating Voltage (VDC) | 5 |
| LED Type and Size | RGB 5 mm |
| LED drive mode | Common Cathode Driver |
| PCB Width | 1.5mm |
| Length (mm) | 20 |
| Width (mm) | 15 |
| Height (mm) | 15 |
| Weight (gm) | 5 |
| Brand/Manufacturer | Generic |
| Country Of Origin | China |
| Packer / Importer Address | Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka - 560027 India. |
| MRP | Rs. 87.32 (Inclusive of all Taxes) |
* Product Images are shown for illustrative purposes only and may differ from actual product.
DIP 3 Color LED Module
- Product Code: EC-5437
- Availability: 37
-
Rs.74.00
- (Excluding 18% GST)