eSun 3D Printer Standard Resin 1Kg-White Specifically designed for LCD/LED light source to achieve better printing quality and better than stock resins of Anycubic and Wanhao D7. It is General Purpose Resin, Compatible to most LCD printers and DLP with LED UV having Faster Printing Speed and Low Odor and No Toxic.
1) Keep away from light and sealed at room temperature.
2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
Avoid any dusty or moist environment.
1) Shake well before use. Avoid any direct sunlight during usage.
2) Keep it away from the children. Do not put in mouth.
3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
4) If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary.
5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds.
- Low viscosity
- Low Odor
- No Toxic.
- Improved flow
- Easy to clean
- Stronger than most other standard resins
- High precision
- Low warp
1 x eSun 3D Printer Standard Resin for LCD 3D Printers 1Kg-White
|Viscosity(25C MPa s)|
|Elongation at Break(%)|
|IZOD Impact Strength(J/m)|
|Country Of Origin||China|
|Packer / Importer Address||Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka - 560027 India.|
|MRP||Rs. 4718.82 (Inclusive of all Taxes)|
* Product Images are shown for illustrative purposes only and may differ from actual product.
eSun 3D Printer Standard Resin for LCD 3D Printers 1Kg-White
- Product Code: EC-7035
- Availability: Out Of Stock
- (Excluding 18% GST)