eSun eABS Max 1.75mm 3D Printing Filament 1Kg is a halogen-free flame retardant filament. With the reduction in shrinkage, warp, and fumes, eABS MAX also sees an increase in toughness, lower moisture absorption, and temperature survivability (-20 deg C) without cracking.
Also, unlike other ABS filaments, the eABS MAX retains its sensitivity to acetone post-processing.
- The appearance is black, nontransparent;
- Non-toxic, tough, hard texture, with good temperature tolerance and creep resistant;
- Good melt fluidity, print smooth, nice abrasive resistance and dimensional stability, oil resistance;
- Compared with ABS and ABS+, it has better toughness, much improved in the craze, edge warping, whole layer stripping situations when printing objects with large corner;
- Maintain 90% of physical performance in -20low temperature and wont crisp;
- Waterproof, less than 1% of water absorption in normal temperature, which ensures flame retardant efficiency;
- Allow acetone polishing for appearance.
1 x eSun eABS Max 1.75mm 3D Printing Filament 1Kg Black.
|Filament Diameter (mm)|
|Filament Weight and Length|
1 kg/ 330 Meters
|Heating Bed Temperature (C)|
|Density ( g/cm)|
|Melt Flow Index (g/10min)|
|Dimensional Accuracy (mm)|
|Roundness Accuracy (mm)|
|Spool Size (mm)|
Hub Diameter- 50
|Bending Strength (MPa)|
|Elongation at Break (%)|
|Flexural Modulus (MPa)|
|Print Temperature (C)|
|Tensile Strength (MPa)|
|Distortion Temp (C,0.45MPa)|
|Impact Strength ( kJ/m)|
|Country Of Origin||China|
|Packer / Importer Address||Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka - 560027 India.|
|MRP||Rs. 2240.82 (Inclusive of all Taxes)|
* Product Images are shown for illustrative purposes only and may differ from actual product.
eSun eABS Max 1.75mm 3D Printing Filament 1Kg - Black
- Product Code: EC-7043
- Availability: 2
- (Excluding 18% GST)