This protection board is 5s in common use lithium battery protection board (you can adjust for how many strings to be used) Specified chip, stable performance, support disconnection protection, over-current protection, over-discharge protection, overcharge protection, with balance, etc. A common use for same port and different port, the protection board uses 15 high-power of ultra-low resistance MOS tubes (discharge of 8, charging 7), in the same port mode can support the discharge current 60A, charging current 60A; different port mode discharges current 80A, charging current 60A. Can use for LMO. Ternary lithium battery. LCO(3.7V)battery packs etc.

Specification:

1. FOR Li-POLYMER LiMnO Protect Parameter(3.6V/3.7V)
2. Single-cell battery overcharge protect voltage: 4.21-4.29 V
3. Single-cell battery overcharge protect recover voltage: 4.14-4.24 V
4. Overcharge protect delay : 1.5-2.5S
5. Single cell battery over-discharge protect voltage : 2.72-2.88 V
6. Single cell battery over-discharge protect recover voltage : 2.9-3.1 V
7. Over charge protective current:100A
8. Over discharge protective current:100A
9. Over-discharge protect delay : 0.5-1.5S
10. Temperature protect: Yes, have a Temperature control interface.
11. Disconnect protect : Yes
12. Shortage protect : Yes
13. Shortage delay : 100-600 uS
14. Shortage protect recover mode: Offload release.
15. Contact discharge current:80A
16. Synopline discharge current:60A
17. Charging current:60A
18. balance function: yes
19. Ampere balance (Current) : 60MA
20. Current balance accuracy : 4.14-4.24V

Package Includes:

1 x White 5S 100A LiFePO4 Lithium Battery Protection PCB Board.