Flat 10% Off on Prepaid Orders, Apply Coupon  GET10  to get Instant 10% Discount

  • Your shopping cart is empty!

0   Wishlist
  • FT245RL (SMD SSOP-28 Package) USB To Parallel FIFO Interface IC

The FT245RL is a USB to parallel FIFO interface with the following advanced features:- 

  • Single chip USB to parallel FIFO bidirectional data transfer interface.
  • Entire USB protocol handled on the chip. No USB specific firmware programming required.
  • Fully integrated 1024 bit EEPROM storing device descriptors and FIFO I/O configuration.
  • Fully integrated USB termination resistors.
  • Fully integrated clock generation with no external crystal required.
  • Data transfer rates up to 1Mbyte / second.
  • 128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
  • FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
  • Unique USB FTDIChip-ID™ feature.
  • Configurable FIFO interface I/O pins.
  • Synchronous and asynchronous bit bang interface options. 
  • Device supplied pre-programmed with unique USB serial number.
  • Supports bus powered, self-powered and highpower bus powered USB configurations.
  • Integrated +3.3V level converter for USB I/O.
  • Integrated level converter on FIFO interface for interfacing to external logic running at between +1.8V and +5V.
  • True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input.
  • Configurable I/O pin output drive strength.  Integrated power-on-reset circuit.
  • Fully integrated AVCC supply filtering - no external filtering required.
  • +3.3V (using external oscillator) to +5.25V (using internal oscillator) Single Supply Operation.
  • Low operating and USB suspend current.
  • Low USB bandwidth consumption.
  • UHCI/OHCI/EHCI host controller compatible.
  • USB 2.0 Full Speed compatible.
  • -40°C to 85°C extended operating temperature range.
  • Available in compact Pb-free 28 Pin SSOP and QFN32 packages (both RoHS compliant). 


Applications:-

  • Upgrading Legacy Peripherals to USB
  • Cellular and Cordless Phone USB data transfer cables and interfaces
  • Interfacing MCU/PLD/FPGA based designs to USB
  • USB Audio and Low Bandwidth Video data transfer
  • PDA to USB data transfer
  • USB Smart Card Readers
  • USB Instrumentation 
  • USB Industrial Control
  • USB MP3 Player Interface
  • USB FLASH Card Reader and Writers
  • Set Top Box PC - USB interface
  • USB Digital Camera Interface
  • USB Hardware Modems
  • USB Wireless Modems
  • USB Bar Code Readers
  • USB Software and Hardware Encryption Dongles 


Specifications:-

Parameter Value Units
Storage Temperature -65 to 150 °C
Floor Life (Out of Bag) At Factory Ambient
 (30°C / 60% Relative Humidity)		 168
(IPC/JEDEC J-STD-033A
MSL Level 3 Compliant)*
 MSL Level 3 Compliant)*		 Hours
MTTF FT245RL 6607685 Hours
Ambient Temperature (Power Applied) -40 to 85 °C
VCC Supply Voltage -0.5 to +6.00 V
DC Input Voltage – USBDP and USBDM -0.5 to +3.8 V
DC Output Current – Outputs 24 mA


Related Document:-

 FT245RL IC Datasheet
Brand/Manufacturer Generic
Country Of Origin China
Packer / Importer Address Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka - 560027 India.
MRP Rs. 395.3 (Inclusive of all Taxes)
Write a review
Please login or register to review

* Product Images are shown for illustrative purposes only and may differ from actual product.

FT245RL (SMD SSOP-28 Package) USB To Parallel FIFO Interface IC

  • Product Code: EC-0470
  • Availability: 31
  • Rs.489.00
  • (Excluding 18% GST)

OR

For all Bulk & B2B Product Enquiries Kindly share your requirement at care@electronicscomp.com

0 reviews / Write a review