DIY Proto HAT Shield for Raspberry Pi 3 , Pi 2, Model B+/A+/B
Space between holes is standard 2.54 mm.
Can Place Resistors, Leds, Capacitors etc.
Can add SO8 Chip like EEPROM.
Extra +3V, +5V and Gnd Holes.
You can design your own circuit or use it as an HAT on Raspberry Pi
1 x Proto Hat Shield
1 x 20x2 Berg Strip Female
4 x Nut
4 x Screw
4 x Bolt
* Product Images are shown for illustrative purposes only and may differ from actual product.
DIY Proto HAT Shield for Raspberry Pi
- Product Code: EC-1576
- Availability: 115
- (Excluding 18% GST)