This low-cost FX-Audio amplifier module is based on a TDA7492 amplifier chip allowing it to deliver a power of 2x50W under 8, and this has high efficiency due to its Class D architecture. The module can also be used in BTL (bridge) mode for the power of 1x100W under 4. The amplifier chip is combined with a heat sink to ensure proper heat dissipation. On the connector site, there is a PH 2.0mm 3 pins connector at the input and screw terminals at the output for the left and right channels.
Note:
*When the speaker impedance is 4 ohms, the operating voltage must be less than 18V.
*When the speaker impedance is 6 ohms, the operating voltage can not exceed 24V.
*When the speaker impedance is 8 ohms, the working voltage can not exceed 26V. The power not to reverse the polarity.
Features:
- Class D amplifier produces 2 x 50 watt @ 8 ohms
- Can be wired R+ to L+ for mono mode
- 8 stereo wiring harness included
- Short-circuit and over-temperature protection
- Supply Voltage 10-26 V DC
Package Includes:
1 x TDA7492 50*2 100W HighPower Digital Amplifier Board
1 x 8 Stereo Wiring Cable
Specifications:
| Model | TDA7492 |
| Input Voltage (V) | 10 to 26 |
| Working Mode | Class D (PWM modulation type) |
| Power (W) | 50 |
| Length (mm) | 72 |
| Width (mm) | 58 |
| Height (mm) | 21 |
| Weight (gm) | 58 |
| Brand/Manufacturer | Generic |
| Country Of Origin | China |
| Packer / Importer Address | Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka - 560027 India. |
| MRP | Rs. 1167.02 (Inclusive of all Taxes) |
* Product Images are shown for illustrative purposes only and may differ from actual product.
TDA7492 50x2 100W High Power Digital Amplifier Board
- Product Code: EC-6482
- Availability: 2
-
Rs.863.00
- (Excluding 18% GST)