E3D Titan Extruder 1.75mm with Direct Drive a Next-Generation Extruder for your 3D Printer brings high performance, lightweight extrusion to everyone! All the benefits of geared extrusion in a lightweight, punchy little package.
Performance, power, push. Titan brings high-performance, lightweight extrusion. All the benefits of geared extrusion in a lightweight, punchy little package. Titan can be mounted on most RepRap 3D printers to improve extrusion and is the recommended extruder for all our HotEnds. For a full Motion System, you'll need 2 x 1.75mm standard Bowden Titans with motors, plus 2 mirrored versions.
Performance: With 3:1 gear reduction, precision milled hobbed gearing, and E3D engineering, we've developed Titan to push with awesome power, while also being incredibly light and compact.
Power: The gear ratio means you're able to use lighter motors as youll need less torque for the same filament pushing force so direct drive systems have a lighter moving carriage, powerful, reliable little beasts when combined with your E3D V6 HotEnd.
Push: Titan fits perfectly into E3Ds modular ecosystem, Titan works for all configurations of Bowden, direct extrusion, 1.75mm, and 3mm. To switch filament diameters only the filament guide needs to be swapped out, and both 3mm and 1.75mm versions are supplied with every Titan.
Speed: Extruders with high gear ratios often struggle with snappy retracts and keeping up with Volcano for big, fast printing. Titans balanced gearing ratio of 3:1 means that you can cope with fast extrusion situations like Volcano and the lightweight gearset gives snappy retractions.
Resolution: Direct-drive extruders can have issues with pulsing of flow because the lower resolution of filament motion results in filament being extruded in pulses. This results in a slightly wavy surface finish and is particularly prevalent when printing at low layer heights. Using 3:1 gearing triples the resolution of the system and allows for smooth printing at the lowest of layer heights, using the smallest of nozzles.
Features:
- 3:1 gearing ratio
- Individually cut, sharp Hobb teeth
- Direct or Bowden
- Standard or mirrored
- Groove mount slot
Package Includes:
1 x E3D Titan Extruder Direct Drive Kit for 1.75mm filament
Kit includes:
1 x Titan body standard
1 x Titan Cover standard
1 x Idler lever standard
1 x Filament Guide 1.75 or 2.85, standard or mirrored
1 x Steel Pinion Gear
1 x Hobb drive
1 x PTFE tubing100mm
1 x 1.5mm Hex Wrench
1 x 2mm Hex Wrench
1 x 2.5mm Hex Wrench
3 x M3x 30 Screws
1 x M3 x 8 Screw
1 x M4 thumbscrew
1 x M4x10 button head screw
1 x M4 Nut
1 x Idler spring
1 x M3 grub screw
1 x Shakeproof washer
Specifications :-
| Orientation | Standard |
| Bowden Set up | Direct Drive |
| PTFE Diameter (mm) | 1.75 |
| PTFE Tube Length (mm) | 110 |
| Length (mm) | 140 |
| Width (mm) | 100 |
| Height (mm) | 55 |
| Weight (gm) | 125 |
| Brand/Manufacturer | Generic |
| Country Of Origin | China |
| Packer / Importer Address | Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka - 560027 India. |
| MRP | Rs. 6960.82 (Inclusive of all Taxes) |
* Product Images are shown for illustrative purposes only and may differ from actual product.
E3D Titan Extruder Direct Drive Kit for 1.75mm filament
- Product Code: EC-7000
- Availability: 5
-
Rs.6899.00
- (Excluding 18% GST)