Winter Sale!! Flat 10% Off on Prepaid Orders, Apply Coupon  WINTER10  in your Cart to get Instant 10% Discount. Last Few Hours!
  • 74F194 4-Bit Bidirectional Universal Shift Register IC (74194) DIP-16 Package

The functional characteristics of the 74F194 4-Bit Bidirectional Shift Register are indicated in the Logic Diagram and Function Table. The register is fully synchronous, with all operations taking place in less than 9ns (typical) for 74F, making the device especially useful for implementing very high speed CPUs, or for memory buffer registers. The 74F194 design has special logic features which increase the range of application. The synchronous operation of the device is determined by two Mode Select inputs, S0 and S1. As shown in the Mode Select-Function Table, data can be entered and shifted from left to right (shift right, Q0→Q1, etc.), or right to left (shift left,Q3→Q2, etc.), or parallel data  can be entered, loading all 4 bits of the register simultaneously. When both S0 and S1 are Low, existing data is retained in a hold (do nothing) mode. The first and last stages provide D-type Serial Data inputs (DSR, DSL) to allow multistage shift right or shift left data transfers without interfering with parallel load operation. Mode Select and data inputs on the74F194 are edge-triggered, responding only to the Low-to-High transition of the Clock (CP). Therefore, the only timing restriction is that the Mode Select and selected data inputs must be stable one setup time prior to the Low-to-High transition of the clock pulse. Signals on the Mode Select, Parallel Data (D0–D3) and Serial Data(DSR, DSL) can change when the clock is in either state, provide donly the recommended setup and hold times, with respect to the clock rising edge, are observed. The four Parallel Data inputs(D0–D3) are D-type inputs. Data appearing on (D0–D3) inputs whenS0 and S1 are High is transferred to the Q0–Q3 outputs respectively, following the next Low-to-High transition of the clock. When Low, the asynchronous Master Reset (MR) overrides all other input conditions and forces the Q outputs Low

Features :-

  • Shift right and shift left capability
  • Synchronous parallel and serial data transfer
  • Easily expanded for both serial and parallel operation
  • Asynchronous Master Reset
  • Hold (do nothing) mode

Specifications :-

  • Supply voltage : 4.5V - 5.5V
  • High–level input voltage : 2.0V
  • Low–level input voltage : 0.8V
  • Input clamp current : -18mA
  • High-level output current : -1mA
  • Low-level output current : 20mA
  • Operating free-air temperature range : +70°C

Package Includes :-

1 X 74F194 4-Bit Bidirectional Universal Shift Register IC (74194) DIP-16 Package

Write a review
Please login or register to review

* Product Images are shown for illustrative purposes only and may differ from actual product.

74F194 4-Bit Bidirectional Universal Shift Register IC (74194) DIP-16 Package

  • Product Code: EC-11399
  • Availability: 3287
  • Rs.17.00
  • (Excluding 18% GST)


For all Bulk & B2B Product Enquiries Kindly share your requirement at