The A401 has a 2-pin connector. This is our standard sensor with the largest sensing area:25.4 mm (1 in.). A401 sensors are available in one force range:111 N (0 25 lb).* The force ranges stated are approximations. The dynamic range of this large force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.
Measurement ranges of 0-1 lb and 0- 7000 lb are achievable with the A401 sensor by utilizing the recommended circuitry. The force range can be extended by reducing the drive voltage, VT, or the resistance value of the feedback resistor, RF. Conversely, the sensitivity can be increased for measurement of lower forces by increasing VT or RF
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
How to Adjust the Force Range:
* Measurement ranges of 0-1 lb and 0-7000 lb are achievable with the A401 sensor by utilizing the recommended circuitry. The force range can be extended by reducing the drive voltage, VT, or the resistance value of the feedback resistor, RF. Conversely, the sensitivity can be increased for measurement of lower forces by increasing VT or RF.
Typical Performance:
Linearity (Error):< 3% of Full Scale (Line drawn from 0 to 50% load)
Repeatability:< 2.5%(Conditioned Sensor, 80% of Full Force Applied)
Hysteresis:< 4.5 % of Full Scale (Conditioned Sensor, 80% of Full Force Applied)
Drift:<5% / logarithmic time (Constant Load of 25 lb (111 N))
Response Time:< 5 sec (Time required for the sensor to respond to an input force; Impact load recorded on Oscilloscope)
Operating Temperature:-40C 60C (-40F 140F)*
* Force reading change per degree of temperature change = 0.36%/C (0.2%/F)
Package Includes:
1 x FlexiForce A401 Force Sensor
Specifications :-
| Force Range | 0-111N (0 11 Kg) |
| Connector | 2-pin Male Square Pin |
| Length ( cm ) | 56.9 mm |
| Width (mm) | 31.8 |
| Thickness (mm) | 0.203 |
| Operating Voltage (VDC) | 0.25 ~ 1.25 |
| Max Current (A) | 0.2 |
| Drift | < 5% per logarithmic time scale |
| Hysteresis | < 4.5 % of full scale |
| Linearity (Error) | < 3% of full scale |
| Pin Spacing (mm) | 2.54 |
| Repeatability | < 2.5% |
| Response Time ( S) | 5 |
| Sensing Area (mm) | 25.4 |
| Surface Layer | Polyester |
| Operating Temperature Range (C) | -40 to 60 |
| RoHS Compliant | Yes |
| Brand/Manufacturer | Generic |
| Country Of Origin | China |
| Packer / Importer Address | Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka - 560027 India. |
* Product Images are shown for illustrative purposes only and may differ from actual product.
FlexiForce A401 Force Sensor
- Product Code: EC-5345
- Availability: Out Of Stock
-
Rs.2830.82