BLHELI_S BL32- 55A 4IN1 3-6S ESC is a completely digital signal, Oneshot and multishot are analog signals. During the use of analog signals, ESC hardware and software will generate some noise, which is clutter. If there is too much clutter, you need to add a filter capacitor or resistor to hardware filtering. (Off-topic, those who need to remove the capacitor is probably the case) and it is a digital signal, do not need to calibrate the ESC, no filtering is required during the transmission!

It is designed for multi-axis UAV transition machines. Accurate speed control, accurate signal acquisition. ESC uses a 32-bit ARM Cortex MCU STM32F051 48MHZ processor, 2048-level throttle resolution, unique algorithm control, and strong anti-interference ability. You can upgrade the firmware online or change the configuration parameters via the signal line.

ESC comes with a current sensing module that can cooperate with flight control to detect current value. ESC adopts an adaptive control system and is compatible with most motors on the market. The PCB board adopts thickened 6-layer treatment, the internal resistance heat generation is small, the layout of the components is optimized, and the installation is more convenient.


Features:

  1. 32Bits ARM Cortex MCU STM32F051 48MHZ CPU
  2. Strong anti-interference ability
  3. PCB adopts 6-layer, low inner resistance
  4. Built-in Current detection module, which can cooperate with the flight control to detect the current value
  5. The Dshot series calls the BB21MCU. 48Mhz
  6. Support 2S-6S, 4PWM input without BEC
  7. Support for Oneshot / Multishot /Dshot BLHELI-32 firmware
  8. You can upgrade the firmware online or change the configuration parameters via the signal line.
  9. ESC comes with a current sensing module that can cooperate with flight control to detect current value.
  10. ESC adopts an adaptive control system and is compatible with most motors on the market.

Package Includes:

1 x JHEMCU 55A 4IN1 3-6S ESC

2 x Wire 12AWG 100mm (Red + Black)

1 x 2200F 25v Capacitor

1 x Connecting Cable



Specifications:

Model

JHEMCU BS-55A ESC

Supports

Oneshot / Multishot /Dshot, BLHELI-32 PWM control signal

Power supply voltage

3-6S (12-26V)

Continuous working current

55A

BEC

No built-in 5V BEC output

Firmware                                              

BLHELI 32 ESC

Mounting hole spacing (mm)

30.5 * 30.5MM

Weight (gm)

10.9


Brand/Manufacturer Generic
Country Of Origin China
Packer / Importer Address Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka - 560027 India.
Write a review
Please login or register to review

* Product Images are shown for illustrative purposes only and may differ from actual product.

JHEMCU BLHeli_32- 55A 4IN1 3-6S ESC

  • Product Code: EC-6074
  • Availability: Out Of Stock
  • Rs.5013.82

OR

For all Bulk & B2B Product Enquiries Kindly share your requirement at care@electronicscomp.com